Main Instructions: To start, click the green flag twice. Press and hold the space key to activate the blowtorch. Hold the blowtorch up to the sprinkler to set it off! Press "ACK/Step" to acknowledge troubles, alarms, etc., and turn pages. The heat and smoke detector's operating temperatures are: no lower than 45 degrees Fahrenheit. In order to reset the pull station or to open the panel, drag the key over the desired lock. The heat detector will activate from a temperature of 95 degrees Fahrenheit or greater. Voice Evac Instructions: To change the tone, press the "5" key on your keyboard to change the tone to 520 HZ Temporal. (Low Frequency or Boston Tone) Press the "M" key on your keyboard to change to tone the male message. Press the "F" key on your keyboard to change the tone to the female message. The electromechanical horn will continue to sound in temporal 3.
Almost done with the system! Just adding the sprinkler code and fixing bugs. The voice evac message is CPS. The devices are System Sensor. The detectors are CPS that were rebranded from Notifier. The voice evac panel/driver is the CPS VoiceVac 3900B. It is essentially the same thing as what Notifier makes.
