To commemorate the R8 people have swapped an 11,500 rpm naturally aspirated v12 in it. the wind noise sprite code is from @airbushead2022 from And the wind noise is from @imkmj05 project https://scratch.mit.edu/projects/534387471 (The turbo sprite) HOW TO LAUNCH: 1. set drive mode to Performance and gear 1 Launch control 2. down arrow, then space (brake 100, then acceleration 100) 3. release brake SPACE: acceleration DOWN ARROW: brake RIGHT&LEFT ARROW: change gear control 1: use space and down arrow control 2: use slider M:switch to MPH K:switch to KPH R: refuel (you can refuel when engine is off) D: change drive mode
Open valves for flames, pops and bangs Half open valves for flames and less pops and bangs Close valves for small pops and bangs ∨ ∨ ∨ ∨ ∨ ∨ ∨ ∨ ∨ ∨ ∨ ∨ ∨ ∨ ∨ ∨ ∨ ∨ ∨ ∨ ∨ ∨ ∨ ∨ ∨ ∨ ∨ ∨ I didn't make most of the things in this project. This project wouldn't be possible without: The original project is made by @imkmj05 Thanks to @airbushead2022 for the start up sound from https://scratch.mit.edu/projects/732668317/ Thanks to @airbushead2022 for the gear change sound from https://scratch.mit.edu/projects/753711431/ Thanks to @airbushead2022 for the pops and bangs sound from https://scratch.mit.edu/projects/732668317/ Thanks to @imkmj05 for the bangs sound sprite from https://scratch.mit.edu/projects/564128664 Thanks to @PugTutor for the bang sound sound from https://scratch.mit.edu/projects/680340866 Thanks to @airbushead2022 for the secondary sound addition from https://scratch.mit.edu/projects/704416199/
