This is the High Rise elevator at the ElevatorFav International Assets Hotel and Restaurant Tower 1! NOTE: This elevator is 80% original, since the motors and door gears were replaced in 2021 when the building was acquired by ElevatorFav Assets. Credits to Jon5432. Low Rise: https://scratch.mit.edu/projects/750821068/ Click the Panel for different designs! Design 1: older E401 panel (with E401 label) Design 2: series 1 panel without labels Design 3: series 1 panel (with OTIS logo and labels) Design 4: newer E401 panel (used sometimes outside US) Design 5: newer series 1 panel Design 6: custom series 1 panel
Low Zone (Floors 4-15): https://scratch.mit.edu/projects/750821068/ UPDATE: Floor passing chime will not beep if on express zone. Press D to change the door. This is a REWORKED project, so not only the speeds were modified, the elevator was also coded to have E401 logic. Information below Manafacturer: OTIS Model: Elevonic 401 (1981-1993) Installed: 1985 (This used to be an office building, but floors were relabeled in 2021 due to acquirement of the building from ElevatorFav Assets) Modernized: 2021 (nothing else was changed except replacing of door gears, and motor. Controllers and everything else is original) Floors Served: B3-B1, L2, L1, G, RB (Restaurant and Bar), C (Casino), AL (Entrance Lobby and Atrium), 1-3, 10 (skylobby), 16-30, 31 (Pool) Capacity: 3500 LB Fixtures: Series 1 (older) Speed: 800 FPM for high rise, 650 FPM for low rise (speed limited to 350 FPM on floors below 3) Elevators in bank: 4 (ELEVATORS 5-8) (Elevators 5 and 7 do not serve Premium Guestrooms) Total guest Elevators: 8 (ELEVATORS 1-8) (Elevators 1,3, 5, and 7 do not serve Premium Guestrooms)