Message: WHOOP WHOOP WHOOP, May I have your attention please? A fire emergency has been reported in the building, while this is being verified, please leave the building by the nearest exit, do not use the elevators, This is a addressable notifier System, I haven’t added the detectors and stations, I will do it, please see this warning for the project, this is only a fire alarm one, the message tone is notifier fast whoop temporal but the voice message is by cooper wheelock, and the voice is from the SAFEPATH 4 By Cooper Wheelock, the notification appliances are are the wheelock str, wheelock hsr, wheelock et80-24mcw-fr, Gentex Speaker Strobe Unknown Model, System Sensor SPSRL, System Sensor SPSR, These Are Here, And The Zone Buttons Are Not Added, Yeah, there’s a silence button on the panel, I used 6 notification appliances, and the strobes on them do work, because I added a candela strobe setting on scratch! Yay! And, the buttons on the panel say good works, the alarm Button activates the strobes, speakers, and horns work! All Do work, The Silence Button Shuts Off The Strobes, Horns, And Speakers, The Drill Button Has Some Info Of What you have, these strobes are white flashing ones, but the strobes flash really slow, also thanks for reading the instructions!
NOTE: Sorry, I can edit this on my own
