ScratchData LogoScratchData
Back to puffycat3's profile

FLIGHT SIMULATOR Antonov An-225 Mriya 2D remix

PUpuffycat3•Created August 1, 2018
FLIGHT SIMULATOR Antonov An-225 Mriya 2D remix
1
0
34 views
View on Scratch

Instructions

FLIGHT SIMULATOR Antonov An-225 Mriya 2D Created by awesome-llama [<]/[>] Elevator controls (pitch) [W]/[S] Increase/decrease thrust [G] Landing gear toggle [Q]/[A] Flaps [Z]/[X] Spoilers [C]/[V] Wheel brakes [I] Information panel toggle [O] Information 2 [D] Fuel dump (hold 3 sec to activate) [E] Elevator mode toggle (automatic/manual) [P] Pause/play ============ HOW TO FLY: (Try my previous simulators which are more simplistic if this is too complicated) Realistic = complicated 1. Pre-flight: Adjust flaps to 20°, and ensure brakes are disengaged. 2. Increase thrust to ~85%. 3. Allow plane to accelerate to ~300kph. Adjust this depending on weight. (More for heavier cargo) 4. Pull up gently and the plane should lift off the ground. 5. Continue ascending at about 10°, and with constant thrust. 6. Raise landing gear, and retract flaps when safe. Landing: (Very complicated) 1. Prepare for landing by lowering the throttle, and pitching down. 2. Let the plane glide and slowly reach the target. Adjust speed and pitch to ensure the plane reaches the runway at the right speed and altitude. This takes practice. Recommended to use the information screen [I] as well. 3. When nearing the runway, lower landing gear and extend flaps fully. 4. Make fine adjustments with thrust and spoilers (they are brakes that slow down the plane) 5. Once over the runway, execute a "flare" - throttle up and pitch up slightly to slow the plane and prevent a hard landing. 6. After touchdown, pitch down so all wheels hit the ground, and use the brakes [C, V] and spoilers [Z, X] to slow down the plane. Retract flaps as well.

Project Details

Project ID237951164
CreatedAugust 1, 2018
Last ModifiedAugust 1, 2018
SharedAugust 1, 2018
Visibilityvisible
CommentsAllowed

Remix Information

Parent ProjectView Parent
Root ProjectView Root